Profile
My name is Satoshi Konno

. I live in Tokyo, Japan, and I'm a computer software engineer working at
Yahoo Japan in the
Roppongi office now.
|
| at Mt. Fuji |
Cyber Garage, cybergarage.org, is my personal domain in Japan, I maintain the domain servers with a 128K access line and a ISDN which has two 64K lines at my home from 1996. CyberKogaei, cyber.koganei.tokyo.jp, was my old personal domain from 1994 to 1996, and the domain servers was run as a UUCP site.
|
| Programming room at my home in 1996 |
I have been loved programming from childhood. My first computer is Fujitsu Micro New 7, FM-New 7. FM-New7 is a 8bit computer which has two 6809 chip sets. Then I used some good Janpenese original computers, NEC PC-9801, FM-TOWNS, Sharp X1, X68000 etc. I use IBM-PC compatible computers now, but it is too bad that there are not good Japanese original computers recentrly.
 |
| Main CPU |
MBL-68B09 (MC68B09 compatible) 8MHz |
| Sub CPU |
MBL-68B09 8MHz |
| RAM |
64KB - free programming area |
| ROM |
32KB - F-BASIC, (MS-BASIC) |
| VRAM |
48KB - 640x400 / 8 colors |
| Audio device |
AY-3-0910 - PSG, Programmable Sound Generator |
| Storage device |
Audio cassette tape recorder (1200 baud) |
| OS |
ROM BASIC (?) |
|
I started on a wire-frame based 3D programming with FM-BASIC on FM-New 7, I would create a good 3D engine like Wizardry

. I started on programming a real 3D engine with GNU g++ and gas or
QuickC for Windows on FM-TOWNS. I have done the porting of the 3D engine on Macintosh LC III with Think C, finally on
PowerMacintosh 6100/60AV with Code Warrior, but I have not been develop the engine yet. Because I can use 3D engines like
OpenGL or
Java3D now, I don't have to develop the engine myself.
 |
| CPU |
i80386DX 16MHz |
| Coprocessor |
i80387 16MHz |
| RAM |
10MB - 2MB + 8MB |
| VRAM |
512KB - 640x480 / 256 index colors, 320x240 /32768 color |
| Audio device |
FM 6 + PCM 8 sounds |
| Storage device |
CD-ROM, 3.5 FDD, 180MB SCSI HDD |
| OS |
TOWNS-OS - Pharlap DOS-Extender / Windows 3.0 with MME |
|
Recentrly, I have interest in low-end embedded devices for 3D and home networking, and I would like to develop more exciting frameworks or applications into the world.